Our Product Range
Precision
Engineered Products
From custom cutting tools and jigs to precision bushings, gages, and full assemblies — every product manufactured to the tightest aerospace and industrial specifications.
- Cutting Tools
Step Drills & Combination Drills
Multi-diameter step drills engineered for aerospace drilling operations. Custom geometries, point angles, and coatings designed for aluminum, stainless, and titanium stack drilling. Available in carbide and HSS.
- Carbide / HSS
- Custom Geometry
- Multi-Step
- Coated Available
- Cutting Tools
Form Milling Cutters
Custom form milling cutters for complex profile machining. Ground from solid carbide or HSS to exact form requirements.
- Solid Carbide
- Custom Form
- Cutting Tools
Backspotfacing Tools
Precision backspotfacing tools for undercutting blind features in aerospace structures. Custom pilots and blade configurations.
- Custom Pilot
- Adjustable Depth
- Cutting Tools
Carbide Inserts & Indexable Toolholders
Custom and standard carbide inserts manufactured to ISO and customer specifications. Matched indexable toolholders in steel and carbide substrates for turning, milling, and boring operations.
- ISO Geometry
- Custom Grades
- PVD Coated
- Turning/Milling
- Cutting Tools
Drivematic Tools
Precision Drivematic tooling for automated aerospace fastener installation. Custom shank configurations and bit geometries.
- Aerospace
- Automated
- Cutting Tools
Punch & Broach Tools
Custom punch and broach tooling for profile forming and key-seating. Hardened tool steel with precision ground profiles.
- Tool Steel
- Custom Profile
- Cutting Tools
Precision Reamers
HSS and carbide reamers for aerospace and industrial bore finishing. Straight and helical flute, standard and custom diameters.
- HSS / Carbide
- Helical Flute
- Jigs & Fixtures
Precision Drill Jigs
Hardened and ground drill jigs for repeatable hole location accuracy in aerospace assembly. Bushing-guided with replaceable wear inserts.
- Hardened Steel
- Replaceable Bushings
- ±0.001"
- Jigs & Fixtures
Assembly Fixtures
Precision assembly fixtures for aerospace sub-assembly operations. Designed for component alignment, bonding, and fastening to tight positional tolerances.
- Aerospace Grade
- Custom Design
- Jigs & Fixtures
CMM & Inspection Fixtures
Dedicated inspection fixtures for CMM measurement routines. Repeatable part location for consistent dimensional verification.
- CMM Ready
- Repeatable
- Jigs & Fixtures
Welding & Bonding Fixtures
Heat-resistant welding and bonding fixtures for aerospace structural assembly. Designed for thermal stability, part access, and repeat-location accuracy.
- Heat Resistant
- Structural
- Bushings & Gages
Precision Drill Bushings
Press-fit, liner, and slip-renewable drill bushings in standard and custom sizes. Ground to tolerances within ±0.0001″ for consistent hole location.
- Press-Fit
- Renewable
- Hardened
- Bushings & Gages
Plug & Ring Gages
Precision plug and ring gages manufactured to ANSI/ASME B89 standards. Go/No-Go gage sets for thread, bore, and OD inspection. Custom tolerance classes available.
- Go / No-Go
- Thread Gages
- Class X/Y/Z
- Bushings & Gages
Adapter & Reduction Bushings
Precision adapter and reduction bushings for tool shank and spindle interfaces. Standard and custom dimensions in steel, stainless, and bronze.
- Steel / Stainless
- Custom Dims
- Bushings & Gages
Locating Pins & Rest Buttons
Hardened and ground locating pins and rest buttons for precision fixture location. Diamond and round pin configurations in standard and custom lengths.
- Hardened
- Diamond / Round
- Clamps & Hold-Downs
Precision Fixture Clamps
Custom fixture clamps and hold-down devices for workholding in aerospace machining and assembly. Designed for repeatable clamping force with minimal part distortion.
- Custom Design
- Low Distortion
- Repeatable
- Clamps & Hold-Downs
Toggle & Swing Clamps
Precision toggle and swing clamp assemblies for high-cycle production fixtures. Quick-acting with controlled clamping force and positive locking.
- Quick-Act
- Positive Lock
- Clamps & Hold-Downs
Strap & Step Clamps
Standard and custom strap clamps for machine tool workholding. Hardened steel with precision ground bearing surfaces.
- Hardened Steel
- Custom Size
- Full Assemblies
Hydraulic & Pneumatic Assemblies
Complete hydraulic and pneumatic tooling assemblies — from individual precision components through to fully assembled, tested, and certified systems ready for deployment.
- Fully Assembled
- Pressure Tested
- Certified
- Full Assemblies
Tooling & MRO Assemblies
Complete maintenance, repair, and overhaul tooling assemblies for aerospace and industrial clients. Kitted and certified with full traceability documentation for immediate deployment.
- MRO Ready
- Full Traceability
- AS9100
- Full Assemblies
AOG Tooling Kits
Pre-kitted AOG tooling packages for aircraft-on-ground situations. Complete sets of replacement tools, bushings, and fixtures packaged for rapid deployment with all required certifications.
- AOG Priority
- Pre-Certified
- Ready to Ship
- Full Assemblies
Complete Tooling Packages
End-to-end tooling packages engineered, manufactured, assembled, inspected, and certified at Avitec. Single-source accountability from drawing to delivery — cutting tools, jigs, fixtures, gages, and documentation in one package.
- Single Source
- Full Certification
- Custom Engineered
- Turnkey
- Cutting Tools
Step Drills & Combination Drills
Multi-diameter step drills engineered for aerospace drilling operations. Custom geometries, point angles, and coatings designed for aluminum, stainless, and titanium stack drilling. Available in carbide and HSS.
- Carbide / HSS
- Custom Geometry
- Multi-Step
- Coated Available
- Cutting Tools
Form Milling Cutters
Custom form milling cutters for complex profile machining. Ground from solid carbide or HSS to exact form requirements.
- Solid Carbide
- Custom Form
- Cutting Tools
Backspotfacing Tools
Precision backspotfacing tools for undercutting blind features in aerospace structures. Custom pilots and blade configurations.
- Custom Pilot
- Adjustable Depth
- Cutting Tools
Carbide Inserts & Indexable Toolholders
Custom and standard carbide inserts manufactured to ISO and customer specifications. Matched indexable toolholders in steel and carbide substrates for turning, milling, and boring operations.
- ISO Geometry
- Custom Grades
- PVD Coated
- Turning/Milling
- Cutting Tools
Drivematic Tools
Precision Drivematic tooling for automated aerospace fastener installation. Custom shank configurations and bit geometries.
- Aerospace
- Automated
- Cutting Tools
Punch & Broach Tools
Custom punch and broach tooling for profile forming and key-seating. Hardened tool steel with precision ground profiles.
- Tool Steel
- Custom Profile
- Cutting Tools
Precision Reamers
HSS and carbide reamers for aerospace and industrial bore finishing. Straight and helical flute, standard and custom diameters.
- HSS / Carbide
- Helical Flute
- Jigs & Fixtures
Precision Drill Jigs
Hardened and ground drill jigs for repeatable hole location accuracy in aerospace assembly. Bushing-guided with replaceable wear inserts.
- Hardened Steel
- Replaceable Bushings
- ±0.001"
- Jigs & Fixtures
Assembly Fixtures
Precision assembly fixtures for aerospace sub-assembly operations. Designed for component alignment, bonding, and fastening to tight positional tolerances.
- Aerospace Grade
- Custom Design
- Jigs & Fixtures
CMM & Inspection Fixtures
Dedicated inspection fixtures for CMM measurement routines. Repeatable part location for consistent dimensional verification.
- CMM Ready
- Repeatable
- Jigs & Fixtures
Welding & Bonding Fixtures
Heat-resistant welding and bonding fixtures for aerospace structural assembly. Designed for thermal stability, part access, and repeat-location accuracy.
- Heat Resistant
- Structural
- Bushings & Gages
Precision Drill Bushings
Press-fit, liner, and slip-renewable drill bushings in standard and custom sizes. Ground to tolerances within ±0.0001″ for consistent hole location.
- Press-Fit
- Renewable
- Hardened
- Bushings & Gages
Plug & Ring Gages
Precision plug and ring gages manufactured to ANSI/ASME B89 standards. Go/No-Go gage sets for thread, bore, and OD inspection. Custom tolerance classes available.
- Go / No-Go
- Thread Gages
- Class X/Y/Z
- Bushings & Gages
Adapter & Reduction Bushings
Precision adapter and reduction bushings for tool shank and spindle interfaces. Standard and custom dimensions in steel, stainless, and bronze.
- Steel / Stainless
- Custom Dims
- Bushings & Gages
Locating Pins & Rest Buttons
Hardened and ground locating pins and rest buttons for precision fixture location. Diamond and round pin configurations in standard and custom lengths.
- Hardened
- Diamond / Round
- Clamps & Hold-Downs
Precision Fixture Clamps
Custom fixture clamps and hold-down devices for workholding in aerospace machining and assembly. Designed for repeatable clamping force with minimal part distortion.
- Custom Design
- Low Distortion
- Repeatable
- Clamps & Hold-Downs
Toggle & Swing Clamps
Precision toggle and swing clamp assemblies for high-cycle production fixtures. Quick-acting with controlled clamping force and positive locking.
- Quick-Act
- Positive Lock
- Clamps & Hold-Downs
Strap & Step Clamps
Standard and custom strap clamps for machine tool workholding. Hardened steel with precision ground bearing surfaces.
- Hardened Steel
- Custom Size
- Full Assemblies
Hydraulic & Pneumatic Assemblies
Complete hydraulic and pneumatic tooling assemblies — from individual precision components through to fully assembled, tested, and certified systems ready for deployment.
- Fully Assembled
- Pressure Tested
- Certified
- Full Assemblies
Tooling & MRO Assemblies
Complete maintenance, repair, and overhaul tooling assemblies for aerospace and industrial clients. Kitted and certified with full traceability documentation for immediate deployment.
- MRO Ready
- Full Traceability
- AS9100
- Full Assemblies
AOG Tooling Kits
Pre-kitted AOG tooling packages for aircraft-on-ground situations. Complete sets of replacement tools, bushings, and fixtures packaged for rapid deployment with all required certifications.
- AOG Priority
- Pre-Certified
- Ready to Ship
- Full Assemblies
Complete Tooling Packages
End-to-end tooling packages engineered, manufactured, assembled, inspected, and certified at Avitec. Single-source accountability from drawing to delivery — cutting tools, jigs, fixtures, gages, and documentation in one package.
- Single Source
- Full Certification
- Custom Engineered
- Turnkey
- Cutting Tools
Step Drills & Combination Drills
Multi-diameter step drills engineered for aerospace drilling operations. Custom geometries, point angles, and coatings designed for aluminum, stainless, and titanium stack drilling. Available in carbide and HSS.
- Carbide / HSS
- Custom Geometry
- Multi-Step
- Coated Available
- Cutting Tools
Form Milling Cutters
Custom form milling cutters for complex profile machining. Ground from solid carbide or HSS to exact form requirements.
- Solid Carbide
- Custom Form
- Cutting Tools
Backspotfacing Tools
Precision backspotfacing tools for undercutting blind features in aerospace structures. Custom pilots and blade configurations.
- Custom Pilot
- Adjustable Depth
- Cutting Tools
Carbide Inserts & Indexable Toolholders
Custom and standard carbide inserts manufactured to ISO and customer specifications. Matched indexable toolholders in steel and carbide substrates for turning, milling, and boring operations.
- ISO Geometry
- Custom Grades
- PVD Coated
- Turning/Milling
- Cutting Tools
Drivematic Tools
Precision Drivematic tooling for automated aerospace fastener installation. Custom shank configurations and bit geometries.
- Aerospace
- Automated
- Cutting Tools
Punch & Broach Tools
Custom punch and broach tooling for profile forming and key-seating. Hardened tool steel with precision ground profiles.
- Tool Steel
- Custom Profile
- Cutting Tools
Precision Reamers
HSS and carbide reamers for aerospace and industrial bore finishing. Straight and helical flute, standard and custom diameters.
- HSS / Carbide
- Helical Flute
- Jigs & Fixtures
Precision Drill Jigs
Hardened and ground drill jigs for repeatable hole location accuracy in aerospace assembly. Bushing-guided with replaceable wear inserts.
- Hardened Steel
- Replaceable Bushings
- ±0.001"
- Jigs & Fixtures
Assembly Fixtures
Precision assembly fixtures for aerospace sub-assembly operations. Designed for component alignment, bonding, and fastening to tight positional tolerances.
- Aerospace Grade
- Custom Design
- Jigs & Fixtures
CMM & Inspection Fixtures
Dedicated inspection fixtures for CMM measurement routines. Repeatable part location for consistent dimensional verification.
- CMM Ready
- Repeatable
- Jigs & Fixtures
Welding & Bonding Fixtures
Heat-resistant welding and bonding fixtures for aerospace structural assembly. Designed for thermal stability, part access, and repeat-location accuracy.
- Heat Resistant
- Structural
- Bushings & Gages
Precision Drill Bushings
Press-fit, liner, and slip-renewable drill bushings in standard and custom sizes. Ground to tolerances within ±0.0001″ for consistent hole location.
- Press-Fit
- Renewable
- Hardened
- Bushings & Gages
Plug & Ring Gages
Precision plug and ring gages manufactured to ANSI/ASME B89 standards. Go/No-Go gage sets for thread, bore, and OD inspection. Custom tolerance classes available.
- Go / No-Go
- Thread Gages
- Class X/Y/Z
- Bushings & Gages
Adapter & Reduction Bushings
Precision adapter and reduction bushings for tool shank and spindle interfaces. Standard and custom dimensions in steel, stainless, and bronze.
- Steel / Stainless
- Custom Dims
- Bushings & Gages
Locating Pins & Rest Buttons
Hardened and ground locating pins and rest buttons for precision fixture location. Diamond and round pin configurations in standard and custom lengths.
- Hardened
- Diamond / Round
- Clamps & Hold-Downs
Precision Fixture Clamps
Custom fixture clamps and hold-down devices for workholding in aerospace machining and assembly. Designed for repeatable clamping force with minimal part distortion.
- Custom Design
- Low Distortion
- Repeatable
- Clamps & Hold-Downs
Toggle & Swing Clamps
Precision toggle and swing clamp assemblies for high-cycle production fixtures. Quick-acting with controlled clamping force and positive locking.
- Quick-Act
- Positive Lock
- Clamps & Hold-Downs
Strap & Step Clamps
Standard and custom strap clamps for machine tool workholding. Hardened steel with precision ground bearing surfaces.
- Hardened Steel
- Custom Size
- Full Assemblies
Hydraulic & Pneumatic Assemblies
Complete hydraulic and pneumatic tooling assemblies — from individual precision components through to fully assembled, tested, and certified systems ready for deployment.
- Fully Assembled
- Pressure Tested
- Certified
- Full Assemblies
Tooling & MRO Assemblies
Complete maintenance, repair, and overhaul tooling assemblies for aerospace and industrial clients. Kitted and certified with full traceability documentation for immediate deployment.
- MRO Ready
- Full Traceability
- AS9100
- Full Assemblies
AOG Tooling Kits
Pre-kitted AOG tooling packages for aircraft-on-ground situations. Complete sets of replacement tools, bushings, and fixtures packaged for rapid deployment with all required certifications.
- AOG Priority
- Pre-Certified
- Ready to Ship
- Full Assemblies
Complete Tooling Packages
End-to-end tooling packages engineered, manufactured, assembled, inspected, and certified at Avitec. Single-source accountability from drawing to delivery — cutting tools, jigs, fixtures, gages, and documentation in one package.
- Single Source
- Full Certification
- Custom Engineered
- Turnkey